MBZ160 automatic horizontal buns machine

1. Open knife block plate, knife block with knives between blocks add a little oil or grease(cooking oil filling is appropriate), injection molding cam at some cooking oil.

2. after power (must have ground protection) to check the machine's rotating, turn on all the switches let the machine idle running, check for normal operation of the various parts.After each test normally closed switch.

3. try to do, the first open molding, then turn the switch for the surface, the time until the machine to produce the inner surface of the hollow bun kneaded into the bucket, and thenopen the regulator for the surface velocity, the required ratio of dough to make the necessary quality, the final closure for the surface switch.

4. Turn on the switch for the filling, the filling into the prepared stuffing a good fight, let the stuffing out of the stuffing tube is filled up until the stuffing from inside the nose.

5. When the surface of the column containing the stuffing after molding cutter into a complete bun, the speed by adjusting for stuffing, make buns meet the requirements of the size of the filling ratio skin.

Technical Parameter